Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
Pictorial Update LS-COCO http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=1258 |
Page 1 of 1 |
Author: | LanceK [ Tue Mar 08, 2005 2:38 am ] |
Post subject: | |
Shes no longer in the white! Enjoy and thanks for looking! ![]() ![]() ![]() ![]() ![]() ![]() |
Author: | JJ Donohue [ Tue Mar 08, 2005 3:37 am ] |
Post subject: | |
Looks like this was done in a surgical suite...nice! |
Author: | Bobc [ Tue Mar 08, 2005 3:52 am ] |
Post subject: | |
Lance that looks awesome my friend. So where is that ceramic tiled drying booth? I think JJ is right. Gotta be in a hospital. ![]() |
Author: | John How [ Tue Mar 08, 2005 3:57 am ] |
Post subject: | |
That's just the surgicaly clean finishing facilty at Kragenbrink guitars. Can I send you my guitars for finishing? Looking very nice by BTW |
Author: | LanceK [ Tue Mar 08, 2005 3:58 am ] |
Post subject: | |
Its my bathroom! ![]() Naa - Tony Ferguson is doing the finishing for me, this is my first guitar done by Tony - so far it's looking good. If anybody wants Tonys info, email me off forum and ill get it to ya.. Lance |
Author: | Harald Lane [ Tue Mar 08, 2005 7:06 am ] |
Post subject: | |
What a wonderful work Lance! ![]() |
Author: | Wade Sylvester [ Tue Mar 08, 2005 9:04 am ] |
Post subject: | |
That's Rich Lance! Nice combo of woods all around. Is that a redwood top or cedar? Fabulous. I bet it sounds as good as it looks. |
Author: | Dave Rector [ Tue Mar 08, 2005 9:09 am ] |
Post subject: | |
That's a mighty nice guitar!! What is the binding on it, koa? |
Author: | LanceK [ Tue Mar 08, 2005 10:19 am ] |
Post subject: | |
Thanks fellas - its an LS redwood top -via Hank Mauel and a set of cocobolo I got from Chris at LMI. The bindings came from Pegasus and are flamed Koa - im hoping to get it back and strung up in 3 weeks. Lance |
Author: | John Kinnaird [ Tue Mar 08, 2005 1:10 pm ] |
Post subject: | |
I really like that little line of sapwood on the back and sides. Very nicely understated ornament. John |
Author: | Don A [ Tue Mar 08, 2005 1:19 pm ] |
Post subject: | |
Looks great. I also like the sapwood below the binding, something else I'd never think of. Looks like Tony has a nice setup and does a great job. |
Author: | LanceK [ Tue Mar 08, 2005 1:21 pm ] |
Post subject: | |
thanks Don- John -- Working with the sapwood and trying to get it right were i wanted it was fun.. I have to admit, ive spent more than a few hour staring at Paul McGills work, I think he really knows how to use sapwood in a guitar.. |
Author: | Jeff Doty [ Tue Mar 08, 2005 1:27 pm ] |
Post subject: | |
Lance, Beautiful guitar, and fantastic work on your part! Love that slotted headstock, looks super classy. Jeff |
Author: | LanceK [ Tue Mar 08, 2005 1:33 pm ] |
Post subject: | |
Thanks Jeff -- |
Author: | JJ Donohue [ Tue Mar 08, 2005 1:38 pm ] |
Post subject: | |
Lance...What kind of jig do you uise for your slots? It looks different (better) than that produced from LMI's jig. This is just a great guitar all around...congratulations. |
Author: | John Mayes [ Tue Mar 08, 2005 4:22 pm ] |
Post subject: | |
didn't happen to see anything of mine there did ya lance :) |
Author: | Matt Gage [ Tue Mar 08, 2005 10:48 pm ] |
Post subject: | |
Nice job bud. |
Author: | Colby Horton [ Wed Mar 09, 2005 1:21 am ] |
Post subject: | |
LOOKS GOOD! ![]() ![]() |
Author: | LanceK [ Thu Mar 10, 2005 1:09 am ] |
Post subject: | |
John, I was wondering of that one hanging in the back ground was yours? Thanks Matt, Colby -- |
Author: | John Mayes [ Thu Mar 10, 2005 2:34 am ] |
Post subject: | |
nope not mine.. I bet it is Del's cause he finishes his guitars with the neck attached. I have a European/Ziricote Jumbo Parlor there. (should be done anytime now) |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |